The Waterproofing Specialist

Industrial Flooring

Product Name Description
Floor Hardener 'SpECtop A100' – colour-less hardwearing surface coating

SpECtop A100 is a single pack, penetrating synthetic acrylic coating which has excellent adhesion to concrete substrates, porous tiles and clay products. It cures to form a semi-gloss flexible coating. The coating is impervious to most oils, alkalis and commonly used chemicals.

SpECtop A100 provides a coating which acts as protective barrier on porous surfaces thus resisting chemical attack and preventing dusting.

Advantages
  • Cures and seals the floor in single operation.
  • Simple one part product applied by brush or spray.
  • Simple one part product applied by brush or spray.
  • Simple one part product applied by brush or spray.
  • Durable surface finish with good abrasion resistance.
  • +/- 1mm –1.75mm movement
SpECtop Armourite E9 -
Floor Hardener emery based, dry shake, monolithic surface
hardener for new concrete floors

SSpECtop Armourite E9 is supplied in 25kg polyethylene bags and consists of graded emery aggregate blended with Ordinary Portland cement and plasticisers. SpECtop Armourite E9 is applied to plastic concrete and the resulting finished surface is extremely dense, abrasion resistant and hard wearing. As the application of SpECtop Armourite E9 results in the floor curing monolithically with the topping, excessive shrinkage, cracking etc., is avoided. The emery aggregate used, apart from being completely inert chemically, is exceptionally hard and is not prone to polishing.

Principle Applications
SpECtop Armourite E9 can be used in any application where an uncoated concrete is required to provide high abrasion, skid and impact resistance. It is particularly suited for heavy industrial wear.
Advantages
  • Non metallic aggregate.
  • No additions required - ready to use.
  • Extremely hard wearing emery aggregate resulting in high resistance to
    abrasion and impact resistance.
  • Monolithic bond to host concrete.
  • Resistant to oils and greases
SpECtop Armourite Standard -
Floor Hardener - dry shake,
monolithic surface hardener for new concrete floors

Spectop Armourite Standard is supplied in 25kg polyethylene bags and consists of graded synthetic mineral aggregate blended with ordinary portiand cement and plasticisers.Spectop Armourite Standard is applied to plastic concrete and the resulting finished surface is extremely dense, abrasion resistant and hard wearing. As the application of Spectop Armourite Standard results in the floor curing monolithically with the topping, excessive shrinkage, cracking etc, is avoided. The aggregate used, apart from being completely insert chemically, is exceptionally hard and is not prone to pollshing.
Spectop Armourite Standard can be used in any application where an uncoated concrete is required to provide high abrasion, skid and impact resistance. It is perticularly suited for heavy industrial wear.
Advantages
  • Non metallic aggregate.
  • No additions required – ready to use.
  • Extremly hard waring aggregate resulting in high resistance to abrasion and impact.
  • Momollthic bond to host conrete.
  • Resistant to oils and greases.
SpECtop ARE125 -
Acid resistant epoxy floor coating

SpECtop ARE 125 is an acid resistant epoxy coating consisting of two component parts for mixing on-site. The coating, once cured, provides a strong semi-flexible layer with good adhesion to cementitious substrates.

SpECtop ARE125 May be use in industrial and commercial situation to provide a hard wearing acid resistance coating to floors and walls such as :

  • Production areas.
  • Dairies.
  • Beverage production and bottling plants.
  • Car parks.
  • Kitchens.
  • Plating shops.
  • Processing plants
Advantages
  • High durability required low maintenance.
  • Resistance to a wide range of chemicals.
  • Easy to clean, hygienic finish.
  • Available in high range of colours to demarcate area and provide a
    light reflective floor.
SpECtop EU -
High strength epoxy underlay
leveling screed

SpECtop EU is a high strength epoxy underlay supplied as a three-component system for mixing on site. SpECtop EU has been specially formulated to withstand chemical attack and impact shock. When laid correctly SpECtop EU will provide a surface with a slight texture ready to receive application of other SpECtop toppings.

Typical uses
SpECtop EU provides an economical method of levelling floors prior to laying alternative SpECtop epoxy screeds and toppings.
Advantages
  • Good impact and chemical resistance.
  • Economic levelling screed.
  • Can be overcoated with any other SpECtop resin flooring system after 24 hours.
SpECtop LFE 2 & LFE4
Self smoothing flow applied epoxy based floor toppings

SpECtop LFE2 & LFE4 are pre-packed, three component self smoothing toppings, which consist of a graded filler in epoxy binder.

Principle Applications
SpECtop LFE2 & SpECtop LFE4 may be used in industrial and commercial situation to provide long lasting finishes in particular where an impervious, abrasion resistant and easy to clean floor is required. SpEctop LFE4 is designed for use in abrasion or impact loading situations.

SpECtop LFE2 & SpECtop LFE4 are designed to be used in a variety of situations, such as:

  • Engineering, production and maintenance areas.
  • Warehousing.
  • Food production, for example dairies,bakeries, fruit/Vegitable processing and canning plants.
  • Beverage production and bottling facilities.
  • Medical and pharmaceutical factories, for example in production areas and laboratories.
  • Kitchens.laundries and canteens.
  • Showrooms and demonstration areas.
Advantages
  • Impact and abrasion resistant.
  • Resistant to a range of acids, alkalls and industrial chemicals.
  • Hygienic and easy to clean finish.
  • Will not support te growth of bacteria, fungi and micro-organism.
  • Seamless.
  • Minimum downtime due to fast application.
  • Completely non-toxic once fully cured.
  • Available in range of colours to provide an attractive, light reflective floor.
SpECtop TE5
Abrasion Resistant epoxy floor screed

SPECtop TES 5 is a three-part trowel applied epoxy floor screed that produces an extremely dense, durable, cemically resistat floor topping.

Principle Applications
SPECtop TE5 may be used in industrial and commecrial situation to floor surfaces able to withstand mechanical abrasion and the spillage of liquids including aggressive chemicals, in situations such as
  • Heavy Engineering plants.
  • Chemical handling and process areas.
  • Oil refineries.
Advantages
  • High impact and abrasion resistant.
  • Resistance to wide range of chemicals.
  • Slip resistant.
  • Available in a range of colours
Advertisments
Facebook Feed
Quick Contact
Name:

Email Address:

Contact No:
Message:

Send Message